RTSP URLs for IP cameras — all brands

These are the paths most commonly reported for 360Eye cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 25 360Eye models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for 7Links cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 10 7Links models.

These are the paths most commonly reported for ABUS cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 2 ABUS models.

These are the paths most commonly reported for ADT cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 27 ADT models.

Advidia devices use Hikvision-based firmware, so the Hikvision /Streaming/Channels paths apply: 101 is the main stream of channel 1 and 102 its sub stream.

Paths reported for 20 Advidia models.

These are the paths most commonly reported for Agasio cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 2 Agasio models.

These are the paths most commonly reported for AirLink cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 3 AirLink models.

These are the paths most commonly reported for AirLive cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 18 AirLive models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Alecto cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 15 Alecto models.

These are the paths most commonly reported for Alhua cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 11 Alhua models.

These are the paths most commonly reported for ALLNET cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 9 ALLNET models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

Amcrest cameras run Dahua-based firmware, so they use the Dahua /cam/realmonitor path. The username is admin and the password is the one set in the Amcrest app or web interface.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Amovision cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 16 Amovision models.

Annke recorders and cameras are Hikvision-based and use the /Streaming/Channels path; some older models answer on /H264/ch1/main/av_stream.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Anpviz cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 29 Anpviz models.

ANRAN devices use XMEye (Xiongmai) firmware, which puts the login inside the path. By default the password is empty.

Paths reported for 11 ANRAN models.

These are the paths most commonly reported for Apexis cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 2 Apexis models.

defaultPrimary is the full-resolution stream and defaultSecondary the lower-resolution one. RTSP must be allowed for the user in the camera's web interface.

The default administrator on older firmware is root; newer cameras ask you to create a user on first start. Add parameters such as resolution= or fps= to the URL to pick a specific profile.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Besder cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 63 Besder models.

These are the paths most commonly reported for Beward cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 18 Beward models.

These are the paths most commonly reported for Boavision cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 19 Boavision models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

inst=1 is the first stream and inst=2 the second. The service account is the default administrator on most Bosch cameras.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Brickcom cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 12 Brickcom models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for CamHi cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 10 CamHi models.

These are the paths most commonly reported for Canon cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 6 Canon models.

These are the paths most commonly reported for CDR King cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

These are the paths most commonly reported for Cisco cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 18 Cisco models.

These are the paths most commonly reported for Compro cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 16 Compro models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Conceptronic cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 13 Conceptronic models.

These are the paths most commonly reported for Cotier cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 26 Cotier models.

CP Plus devices use Dahua-based firmware, so the Dahua /cam/realmonitor path applies: subtype=0 is the main stream and subtype=1 the sub stream.

Paths reported for 2 CP Plus models.

These are the paths most commonly reported for Ctronics cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 58 Ctronics models.

Most D-Link DCS cameras answer on /live1.sdp for the first profile and /live2.sdp for the second; some older models use /play1.sdp.

subtype=0 is the main stream and subtype=1 the sub stream. The same path works on Dahua NVRs and XVRs — just change channel=.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for DBPOWER cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 2 DBPOWER models.

These are the paths most commonly reported for Denver cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 33 Denver models.

These are the paths most commonly reported for Dericam cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 13 Dericam models.

These are the paths most commonly reported for Digital Watchdog cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 27 Digital Watchdog models.

These are the paths most commonly reported for DIGITUS cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 23 DIGITUS models.

These are the paths most commonly reported for Digoo cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 24 Digoo models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Edimax cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 19 Edimax models.

ELP devices use XMEye (Xiongmai) firmware, which puts the login inside the path. By default the password is empty.

Paths reported for 22 ELP models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for ELRO cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Eminent cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 16 Eminent models.

These are the paths most commonly reported for eneo cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 6 eneo models.

ESCAM devices use XMEye (Xiongmai) firmware, which puts the login inside the path. By default the password is empty.

Paths reported for 48 ESCAM models.

RTSP is available on selected eufy cameras and HomeBase models: enable it in the eufy app (Settings → Storage → NAS (RTSP)) and set a username and password there.

These are the paths most commonly reported for EverFocus cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 25 EverFocus models.

EZVIZ is Hikvision's consumer brand. The password is the 6-letter verification code on the camera label. Some models require enabling RTSP/local streaming in the EZVIZ app first.

These are the paths most commonly reported for Falcon Eye cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 4 Falcon Eye models.

These are the paths most commonly reported for FDT cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 29 FDT models.

FLIR devices use Dahua-based firmware, so the Dahua /cam/realmonitor path applies: subtype=0 is the main stream and subtype=1 the sub stream.

Paths reported for 19 FLIR models.

These are the paths most commonly reported for Floureon cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 31 Floureon models.

Foscam HD cameras use port 88 for both web and RTSP; some newer models use 554. The login is the camera's admin account.

These are the paths most commonly reported for Ganz cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 5 Ganz models.

These are the paths most commonly reported for Genbolt cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 31 Genbolt models.

GeoVision uses port 8554 by default; CH001 is the first channel, CH002 the second, and so on.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

/0 is the primary stream and /4 the secondary stream on most Grandstream GSC/GXV cameras.

These are the paths most commonly reported for GW Security cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 30 GW Security models.

These are the paths most commonly reported for H.View cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 16 H.View models.

Streams are delivered through numbered video profiles. The profile numbers can be changed in Setup → Video Profile, so check which profile is H.264 on your camera.

These are the paths most commonly reported for Heden cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 10 Heden models.

These are the paths most commonly reported for HeimVision cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 22 HeimVision models.

These are the paths most commonly reported for Herospeed cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 25 Herospeed models.

The channel number is followed by 01 for the main stream and 02 for the sub stream, so channel 3 on an NVR is /Streaming/Channels/301. The password is the one you set when activating the camera.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for HiLook cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 21 HiLook models.

These are the paths most commonly reported for Hiseeu cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 29 Hiseeu models.

HiWatch devices use Hikvision-based firmware, so the Hikvision /Streaming/Channels paths apply: 101 is the main stream of channel 1 and 102 its sub stream.

Paths reported for 33 HiWatch models.

Honeywell devices use Dahua-based firmware, so the Dahua /cam/realmonitor path applies: subtype=0 is the main stream and subtype=1 the sub stream.

Paths reported for 9 Honeywell models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for HooToo cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 13 HooToo models.

These are the paths most commonly reported for Hosafe cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 37 Hosafe models.

These are the paths most commonly reported for Hunt cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 3 Hunt models.

These are the paths most commonly reported for iCamera cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 14 iCamera models.

These are the paths most commonly reported for iCSee cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 20 iCSee models.

These are the paths most commonly reported for ieGeek cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 16 ieGeek models.

Imou is Dahua's consumer brand. The username is admin and the password is the safety code printed on the camera label (unless you changed it).

These are the paths most commonly reported for INSTAR cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 34 INSTAR models.

These are the paths most commonly reported for Insteon cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 10 Insteon models.

Intelbras devices use Dahua-based firmware, so the Dahua /cam/realmonitor path applies: subtype=0 is the main stream and subtype=1 the sub stream.

Paths reported for 6 Intelbras models.

These are the paths most commonly reported for IPCC cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 25 IPCC models.

These are the paths most commonly reported for IQeye cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 7 IQeye models.

These are the paths most commonly reported for Jaycar cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 6 Jaycar models.

These are the paths most commonly reported for Jennov cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 5 Jennov models.

These are the paths most commonly reported for Jidetech cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 21 Jidetech models.

Jooan devices use XMEye (Xiongmai) firmware, which puts the login inside the path. By default the password is empty.

Paths reported for 37 Jooan models.

These are the paths most commonly reported for Jovision cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 16 Jovision models.

These are the paths most commonly reported for JVC cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 7 JVC models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Kaikong cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 11 Kaikong models.

These are the paths most commonly reported for KKmoon cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 43 KKmoon models.

LaView devices use Hikvision-based firmware, so the Hikvision /Streaming/Channels paths apply: 101 is the main stream of channel 1 and 102 its sub stream.

Paths reported for 22 LaView models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for LevelOne cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 9 LevelOne models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for LG cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 11 LG models.

These are the paths most commonly reported for Linksys cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 11 Linksys models.

These are the paths most commonly reported for Loftek cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Longse devices use XMEye (Xiongmai) firmware, which puts the login inside the path. By default the password is empty.

Paths reported for 15 Longse models.

These are the paths most commonly reported for Loosafe cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 25 Loosafe models.

Current Lorex cameras and NVRs are Dahua-based and use the /cam/realmonitor path. Some older Lorex models use different firmware — check the manual if this path doesn't answer.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

LTS devices use Hikvision-based firmware, so the Hikvision /Streaming/Channels paths apply: 101 is the main stream of channel 1 and 102 its sub stream.

Paths reported for 22 LTS models.

LUPUS devices use Dahua-based firmware, so the Dahua /cam/realmonitor path applies: subtype=0 is the main stream and subtype=1 the sub stream.

Paths reported for 5 LUPUS models.

These are the paths most commonly reported for Merit LILIN cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 21 Merit LILIN models.

These are the paths most commonly reported for Messoa cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 13 Messoa models.

These are the paths most commonly reported for Microseven cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 23 Microseven models.

/main and /sub return the primary and secondary streams; a third stream is available on /third if it's enabled.

Newer Mobotix cameras offer H.264 over RTSP once it is enabled in the camera setup. MxPEG and MJPEG streams can't be played in the browser.

These are the paths most commonly reported for Momentum cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 28 Momentum models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Motorola cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

These are the paths most commonly reported for Neo Coolcam cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 16 Neo Coolcam models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Netcam cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 21 Netcam models.

These are the paths most commonly reported for Night Owl cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

NOVIcam devices use XMEye (Xiongmai) firmware, which puts the login inside the path. By default the password is empty.

Paths reported for 11 NOVIcam models.

NVT devices use XMEye (Xiongmai) firmware, which puts the login inside the path. By default the password is empty.

Paths reported for 26 NVT models.

Optimus devices use XMEye (Xiongmai) firmware, which puts the login inside the path. By default the password is empty.

Paths reported for 4 Optimus models.

stream_2, stream_3 and stream_4 select the additional encoder streams configured in the camera's web interface.

These are the paths most commonly reported for Pelco cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 11 Pelco models.

These are the paths most commonly reported for PLANET cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 24 PLANET models.

These are the paths most commonly reported for Planex cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Polyvision devices use XMEye (Xiongmai) firmware, which puts the login inside the path. By default the password is empty.

Paths reported for 16 Polyvision models.

These are the paths most commonly reported for Provision-ISR cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 16 Provision-ISR models.

Q-See devices use Dahua-based firmware, so the Dahua /cam/realmonitor path applies: subtype=0 is the main stream and subtype=1 the sub stream.

Paths reported for 7 Q-See models.

These are the paths most commonly reported for Raysharp cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 2 Raysharp models.

On newer firmware RTSP is off by default: enable it in Settings → Network → Advanced → Server Settings. 4K and 5MP+ models send the main stream in H.265, so use the sub stream if your browser can't decode H.265.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Revotech cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 15 Revotech models.

These are the paths most commonly reported for RVi cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 11 RVi models.

These are the paths most commonly reported for SafeHome cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 18 SafeHome models.

These are the paths most commonly reported for SANNCE cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 3 SANNCE models.

These are the paths most commonly reported for Sinocam cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 23 Sinocam models.

video1 is the first stream and video2 the second, matching the stream settings in the camera's web interface.

Speco devices use Hikvision-based firmware, so the Hikvision /Streaming/Channels paths apply: 101 is the main stream of channel 1 and 102 its sub stream.

Paths reported for 4 Speco models.

These are the paths most commonly reported for Sricam cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 16 Sricam models.

These are the paths most commonly reported for SriCCTV cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 3 SriCCTV models.

These are the paths most commonly reported for Srihome cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 24 Srihome models.

These are the paths most commonly reported for SunEyes cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 13 SunEyes models.

Supra Space devices use Hikvision-based firmware, so the Hikvision /Streaming/Channels paths apply: 101 is the main stream of channel 1 and 102 its sub stream.

ch01/0 is the main stream of channel 1 and ch01/1 its sub stream. Newer Swann NVRs are Hikvision-based and may use /Streaming/Channels/101 instead.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for SZ Sinocam cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 45 SZ Sinocam models.

Techage devices use XMEye (Xiongmai) firmware, which puts the login inside the path. By default the password is empty.

Paths reported for 21 Techage models.

These are the paths most commonly reported for TechView cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 11 TechView models.

These are the paths most commonly reported for Tenda cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 15 Tenda models.

These are the paths most commonly reported for Tiandy cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 12 Tiandy models.

These are the paths most commonly reported for Toshiba cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 20 Toshiba models.

Tapo cameras need a separate camera account for RTSP: in the Tapo app open the camera → Settings → Advanced Settings → Camera Account and create a username and password. Use those, not your TP-Link ID.

VIGI cameras use the same /stream1 and /stream2 paths as Tapo, with the admin user set during initial setup.

These are the paths most commonly reported for TRASSIR cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 18 TRASSIR models.

These are the paths most commonly reported for Trivision cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 25 Trivision models.

These are the paths most commonly reported for Ubiquiti (airCam / UniFi Video) cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 23 Ubiquiti (airCam / UniFi Video) models.

In UniFi Protect open the camera → Settings → Advanced and enable RTSP for the quality you want. Protect shows a link with a unique token — paste that token here. The link has no username or password.

These are the paths most commonly reported for Uniarch cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 13 Uniarch models.

s0 is the main stream and s1 the sub stream; on an NVR change c1 to the channel number. Some older models only answer on /media/video1 and /media/video2.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Victure cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 23 Victure models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

live1s1 is the first stream and live1s2 the second; very old models only answer on /live.sdp.

Vstarcam cameras stream on port 10554; av0_0 is the main stream and av0_1 the sub stream.

These are the paths most commonly reported for Wansview cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 56 Wansview models.

These are the paths most commonly reported for Xiaomi cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 9 Xiaomi models.

Cameras and DVRs that use the XMEye app (Xiongmai modules, many unbranded models) put the login inside the path. By default the password is empty.

Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for Xvision cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 17 Xvision models.

These are the paths most commonly reported for Y-cam cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 21 Y-cam models.

These are the paths most commonly reported for YI cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 16 YI models.

Many inexpensive cameras managed by the Yoosee or CamHi apps expose /onvif1 (main) and /onvif2 (sub). The password is the device password set in the app.

These are the paths most commonly reported for Zavio cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 22 Zavio models.

These are the paths most commonly reported for Zmodo cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 15 Zmodo models. · Channel 1 is shown; on an NVR/DVR change the channel number for other cameras.

These are the paths most commonly reported for ZOSI cameras. If yours doesn't answer, check the camera's web interface or scan it with ONVIF Device Manager to get the exact address.

Paths reported for 25 ZOSI models.